Link between two components. More...

#include <link.h>

Inheritance diagram for SST::Link:

Public Member Functions
	Link (LinkId_t id)
	Create a new link with a given ID.

void	setLatency (Cycle_t lat)
	set minimum link latency

void	addRecvLatency (int cycles, std::string timebase)
	Set additional Latency to be added on to events coming in on this link. More...

void	addRecvLatency (SimTime_t cycles, TimeConverter *timebase)
	Set additional Latency to be added on to events coming in on this link. More...

void	setFunctor (Event::HandlerBase *functor)
	Set the callback function to be called when a message is delivered. More...

void	setPolling ()
	Specifies that this link has no callback, and is poll-based only.

void	send (SimTime_t delay, TimeConverter tc, Event event)
	Send an event over the link with additional delay. More...

void	send (SimTime_t delay, Event *event)
	Send an event with additional delay. More...

void	send (Event *event)
	Send an event with the Link's default delay. More...

Event *	recv ()
	Retrieve a pending event from the Link. More...

void	setDefaultTimeBase (TimeConverter *tc)
	Manually set the default detaulTimeBase. More...

TimeConverter *	getDefaultTimeBase ()
	Return the default Time Base for this link.

void	deliverEvent (Event *event) const
	Causes an event to be delivered to the registered callback.

LinkId_t	getId ()
	Return the ID of this link.

void	sendUntimedData (Event *data)
	Send data during the init() phase. More...

Event *	recvUntimedData ()
	Receive an event (if any) during the init() phase.

void	sendInitData (Event *init_data)
	Send data during the complete() phase. More...

Event *	recvInitData ()
	Receive an event (if any) during the complete() phase.

Protected Attributes
ActivityQueue *	recvQueue
	Queue of events to be received by the owning component.

ActivityQueue *	untimedQueue
	Queue of events to be received during init by the owning component.

ActivityQueue *	configuredQueue
	Currently active Queue.

Event::HandlerBase *	rFunctor
	Receive functor. More...

TimeConverter *	defaultTimeBase
	Timebase used if no other timebase is specified. More...

SimTime_t	latency
	Latency of the link. More...

Link *	pair_link
	Pointer to the opposite side of this link.

Static Protected Attributes
static ActivityQueue *	uninitQueue = new UninitializedQueue("ERROR: Trying to send or recv from link during initialization. Send and Recv cannot be called before setup.")
	Uninitialized queue. More...

static ActivityQueue *	afterInitQueue = new UninitializedQueue("ERROR: Trying to call sendUntimedData/sendInitData or recvUntimedData/recvInitData during the run phase.")
	Uninitialized queue. More...

static ActivityQueue *	afterRunQueue = new UninitializedQueue("ERROR: Trying to call send or recv during complete phase.")
	Uninitialized queue. More...

Friends
class	LinkPair

class	NewRankSync

class	NewThreadSync

class	Simulation

class	SyncBase

class	ThreadSync

class	SyncManager

class	ComponentInfo

Detailed Description

Link between two components.

Carries events

Member Function Documentation

void SST::Link::addRecvLatency	(	int	cycles,
		std::string	timebase
	)

Set additional Latency to be added on to events coming in on this link.

Parameters

cycles	Number of Cycles to be added
timebase	Base Units of cycles

References SST::TimeLord::getSimCycles(), SST::Simulation::getSimulation(), SST::Simulation::getTimeLord(), latency, and pair_link.

void SST::Link::addRecvLatency	(	SimTime_t	cycles,
		TimeConverter *	timebase
	)

Set additional Latency to be added on to events coming in on this link.

Parameters

cycles	Number of Cycles to be added
timebase	Base Units of cycles

References SST::TimeConverter::convertToCoreTime(), latency, and pair_link.

Event * SST::Link::recv ( )

Retrieve a pending event from the Link.

For links which do not have a set event handler, they can be polled with this function. Returns NULL if there is no pending event.

References SST::ActivityQueue::empty(), SST::Output::fatal(), SST::ActivityQueue::front(), SST::Simulation::getCurrentSimCycle(), SST::Activity::getDeliveryTime(), SST::Simulation::getSimulation(), SST::Simulation::getSimulationOutput(), SST::ActivityQueue::pop(), and recvQueue.

void SST::Link::send	(	SimTime_t	delay,
		TimeConverter *	tc,
		Event *	event
	)

Send an event over the link with additional delay.

Sends an event over a link with an additional delay specified with a TimeConverter. I.e. the total delay is the link's delay + the additional specified delay.

Parameters

delay	- additional delay
tc	- time converter to specify units for the additional delay
event	- the Event to send

References SST::TimeConverter::convertToCoreTime(), SST::Output::fatal(), SST::Simulation::getCurrentSimCycle(), SST::Simulation::getSimulation(), SST::Simulation::getSimulationOutput(), SST::ActivityQueue::insert(), latency, pair_link, and recvQueue.

Referenced by send().

void SST::Link::send	(	SimTime_t	delay,
		Event *	event
	)

inline

Send an event with additional delay.

Sends an event over a link with additional delay specified by the Link's default timebase.

Parameters

delay	The additional delay, in units of the default Link timebase
event	The event to send

References defaultTimeBase, and send().

void SST::Link::send ( Event * event )

inline

Send an event with the Link's default delay.

Parameters

event The event to send

References send().

void SST::Link::sendInitData ( Event * init_data )

inline

Send data during the complete() phase.

References sendUntimedData().

Referenced by SST::Interfaces::SimpleMem::sendInitData().

void SST::Link::sendUntimedData ( Event * data )

Send data during the init() phase.

References SST::Simulation::getSimulation(), SST::ActivityQueue::insert(), pair_link, SST::Event::setDeliveryLink(), SST::Activity::setDeliveryTime(), and untimedQueue.

Referenced by sendInitData().

void SST::Link::setDefaultTimeBase ( TimeConverter * tc )

Manually set the default detaulTimeBase.

Parameters

tc	TimeConverter object for the timebase

References defaultTimeBase.

Referenced by SST::BaseComponent::configureLink(), and SST::Simulation::performWireUp().

void SST::Link::setFunctor ( Event::HandlerBase * functor )

inline

Set the callback function to be called when a message is delivered.

References rFunctor.

Referenced by SST::BaseComponent::configureLink(), and SST::BaseComponent::selfLink().

Field Documentation

ActivityQueue * SST::Link::afterInitQueue = new UninitializedQueue("ERROR: Trying to call sendUntimedData/sendInitData or recvUntimedData/recvInitData during the run phase.")

staticprotected

Uninitialized queue.

Used for error detection

ActivityQueue * SST::Link::afterRunQueue = new UninitializedQueue("ERROR: Trying to call send or recv during complete phase.")

staticprotected

Uninitialized queue.

Used for error detection

TimeConverter* SST::Link::defaultTimeBase

protected

Timebase used if no other timebase is specified.

Used to specify the units for added delays when sending, such as in Link::send(). Often set by the Component::registerClock() function if the regAll argument is true.

Referenced by getDefaultTimeBase(), send(), and setDefaultTimeBase().

SimTime_t SST::Link::latency

protected

Latency of the link.

It is used by the partitioner as the weight. This latency is added to the delay put on the event by the component.

Referenced by addRecvLatency(), send(), and setLatency().

Event::HandlerBase* SST::Link::rFunctor

protected

Receive functor.

This functor is set when the link is connected. Determines what the receiver wants to be called

Referenced by setFunctor().

ActivityQueue * SST::Link::uninitQueue = new UninitializedQueue("ERROR: Trying to send or recv from link during initialization. Send and Recv cannot be called before setup.")

staticprotected

Uninitialized queue.

Used for error detection

Referenced by Link().

The documentation for this class was generated from the following files:

src/sst/core/link.h
src/sst/core/link.cc

Public Member Functions

Protected Attributes

Static Protected Attributes

Friends

Detailed Description

Member Function Documentation

Field Documentation