SST 12.1.0
Structural Simulation Toolkit
SST::SubComponent Class Reference

SubComponent is a class loadable through the factory which allows dynamic functionality to be added to a Component. More...

#include <subcomponent.h>

Inheritance diagram for SST::SubComponent:
SST::BaseComponent SST::CoreTest::MessageMesh::PortInterface SST::CoreTest::MessageMesh::RouteInterface SST::CoreTestSubComponent::SubCompInterface SST::Interfaces::SimpleMem SST::Interfaces::SimpleNetwork SST::Interfaces::SimpleNetwork::NetworkInspector SST::Interfaces::StandardMem SST::CoreTest::MessageMesh::MessagePort SST::CoreTest::MessageMesh::PortSlot SST::CoreTest::MessageMesh::RouteMessage SST::CoreTestSubComponent::SubCompSendRecvInterface SST::CoreTestSubComponent::SubCompSlotInterface SST::CoreTestSubComponent::SubCompReceiver SST::CoreTestSubComponent::SubCompSender SST::CoreTestSubComponent::SubCompSlot

Public Member Functions

 SST_ELI_DECLARE_INFO_EXTERN (ELI::ProvidesInterface, ELI::ProvidesParams, ELI::ProvidesPorts, ELI::ProvidesSubComponentSlots, ELI::ProvidesStats, ELI::ProvidesProfilePoints, ELI::ProvidesAttributes) SubComponent(ComponentId_t id)
 
virtual void init (unsigned int UNUSED(phase)) override
 Used during the init phase. More...
 
virtual void setup () override
 Called after all components have been constructed and initialization has completed, but before simulation time has begun. More...
 
virtual void finish () override
 Called after simulation completes, but before objects are destroyed. More...
 
- Public Member Functions inherited from SST::BaseComponent
 BaseComponent (ComponentId_t id)
 
const std::string & getType () const
 
ComponentId_t getId () const
 Returns unique component ID.
 
uint8_t getStatisticLoadLevel () const
 Returns Component Statistic load level.
 
virtual void emergencyShutdown (void)
 Called when SIGINT or SIGTERM has been seen. More...
 
const std::string & getName () const
 Returns Component/SubComponent Name.
 
const std::string & getParentComponentName () const
 Returns the name of the parent Component, or, if called on a Component, the name of that Component.
 
virtual void init (unsigned int UNUSED(phase))
 Used during the init phase. More...
 
virtual void complete (unsigned int UNUSED(phase))
 Used during the complete phase after the end of simulation. More...
 
virtual void setup ()
 Called after all components have been constructed and initialization has completed, but before simulation time has begun. More...
 
virtual void finish ()
 Called after complete phase, but before objects are destroyed. More...
 
virtual bool Status ()
 Currently unused function.
 
virtual void printStatus (Output &UNUSED(out))
 Called by the Simulation to request that the component print it's current status. More...
 
UnitAlgebra getCoreTimeBase () const
 Get the core timebase.
 
SimTime_t getCurrentSimCycle () const
 Return the current simulation time as a cycle count.
 
int getCurrentPriority () const
 Return the current priority.
 
UnitAlgebra getElapsedSimTime () const
 Return the elapsed simulation time as a time.
 
SimTime_t getEndSimCycle () const
 Return the end simulation time as a cycle count.
 
UnitAlgebra getEndSimTime () const
 Return the end simulation time as a time.
 
UnitAlgebra getFinalSimTime () const
 Return the end simulation time as a time.
 
RankInfo getRank () const
 Get this instance's parallel rank.
 
RankInfo getNumRanks () const
 Get the number of parallel ranks in the simulation.
 
OutputgetSimulationOutput () const
 Return the base simulation Output class instance.
 
SimTime_t getCurrentSimTime (TimeConverter *tc) const
 return the time since the simulation began in units specified by the parameter. More...
 
SimTime_t getCurrentSimTime () const
 return the time since the simulation began in the default timebase
 
SimTime_t getCurrentSimTime (const std::string &base) const
 return the time since the simulation began in timebase specified More...
 
SimTime_t getCurrentSimTimeNano () const
 Utility function to return the time since the simulation began in nanoseconds.
 
SimTime_t getCurrentSimTimeMicro () const
 Utility function to return the time since the simulation began in microseconds.
 
SimTime_t getCurrentSimTimeMilli () const
 Utility function to return the time since the simulation began in milliseconds.
 
double getRunPhaseElapsedRealTime () const
 Get the amount of real-time spent executing the run phase of the simulation. More...
 
double getInitPhaseElapsedRealTime () const
 Get the amount of real-time spent executing the init phase of the simulation. More...
 
double getCompletePhaseElapsedRealTime () const
 Get the amount of real-time spent executing the complete phase of the simulation. More...
 
SubComponentSlotInfogetSubComponentSlotInfo (const std::string &name, bool fatalOnEmptyIndex=false)
 
const std::vector< double > & getCoordinates () const
 Retrieve the X,Y,Z coordinates of this component.
 

Friends

class Component
 

Additional Inherited Members

- Protected Types inherited from SST::BaseComponent
using StatCreateFunction = std::function< Statistics::StatisticBase *(BaseComponent *, Statistics::StatisticProcessingEngine *, const std::string &, const std::string &, const std::string &, Params &)>
 
- Protected Member Functions inherited from SST::BaseComponent
bool isSimulationRunModeInit () const
 Check to see if the run mode was set to INIT. More...
 
bool isSimulationRunModeRun () const
 Check to see if the run mode was set to RUN. More...
 
bool isSimulationRunModeBoth () const
 Check to see if the run mode was set to BOTH. More...
 
std::string & getOutputDirectory () const
 Returns the output directory of the simulation. More...
 
void requireLibrary (const std::string &name)
 Signifies that a library is required for this simulation. More...
 
bool isPortConnected (const std::string &name) const
 Determine if a port name is connected to any links.
 
LinkconfigureLink (const std::string &name, TimeConverter *time_base, Event::HandlerBase *handler=nullptr)
 Configure a Link. More...
 
LinkconfigureLink (const std::string &name, const std::string &time_base, Event::HandlerBase *handler=nullptr)
 Configure a Link. More...
 
LinkconfigureLink (const std::string &name, const UnitAlgebra &time_base, Event::HandlerBase *handler=nullptr)
 Configure a Link. More...
 
LinkconfigureLink (const std::string &name, Event::HandlerBase *handler=nullptr)
 Configure a Link. More...
 
LinkconfigureSelfLink (const std::string &name, TimeConverter *time_base, Event::HandlerBase *handler=nullptr)
 Configure a SelfLink (Loopback link) More...
 
LinkconfigureSelfLink (const std::string &name, const std::string &time_base, Event::HandlerBase *handler=nullptr)
 Configure a SelfLink (Loopback link) More...
 
LinkconfigureSelfLink (const std::string &name, const UnitAlgebra &time_base, Event::HandlerBase *handler=nullptr)
 Configure a SelfLink (Loopback link) More...
 
LinkconfigureSelfLink (const std::string &name, Event::HandlerBase *handler=nullptr)
 Configure a SelfLink (Loopback link) More...
 
TimeConverterregisterClock (const std::string &freq, Clock::HandlerBase *handler, bool regAll=true)
 Registers a clock for this component. More...
 
TimeConverterregisterClock (const UnitAlgebra &freq, Clock::HandlerBase *handler, bool regAll=true)
 Registers a clock for this component. More...
 
TimeConverterregisterClock (TimeConverter *tc, Clock::HandlerBase *handler, bool regAll=true)
 Registers a clock for this component. More...
 
void unregisterClock (TimeConverter *tc, Clock::HandlerBase *handler)
 Removes a clock handler from the component.
 
Cycle_t reregisterClock (TimeConverter *freq, Clock::HandlerBase *handler)
 Reactivates an existing Clock and Handler. More...
 
Cycle_t getNextClockCycle (TimeConverter *freq)
 Returns the next Cycle that the TimeConverter would fire.
 
TimeConverterregisterTimeBase (const std::string &base, bool regAll=true)
 Registers a default time base for the component and optionally sets the the component's links to that timebase. More...
 
TimeConvertergetTimeConverter (const std::string &base) const
 
TimeConvertergetTimeConverter (const UnitAlgebra &base) const
 
bool isStatisticShared (const std::string &statName, bool include_me=false)
 
template<typename T >
Statistics::Statistic< T > * createStatistic (SST::Params &params, StatisticId_t id, const std::string &name, const std::string &statSubId)
 
template<typename T >
Statistics::Statistic< T > * createNullStatistic (SST::Params &params, const std::string &name, const std::string &statSubId="")
 
template<typename T >
Statistics::Statistic< T > * registerStatistic (SST::Params &params, const std::string &statName, const std::string &statSubId="", bool inserting=false)
 Registers a statistic. More...
 
template<typename T >
Statistics::Statistic< T > * registerStatistic (const std::string &statName, const std::string &statSubId="")
 
template<typename... Args>
Statistics::Statistic< std::tuple< Args... > > * registerMultiStatistic (const std::string &statName, const std::string &statSubId="")
 
template<typename... Args>
Statistics::Statistic< std::tuple< Args... > > * registerMultiStatistic (SST::Params &params, const std::string &statName, const std::string &statSubId="")
 
template<typename T >
Statistics::Statistic< T > * registerStatistic (const char *statName, const char *statSubId="")
 
void performStatisticOutput (Statistics::StatisticBase *stat)
 Called by the Components and Subcomponent to perform a statistic Output. More...
 
void performGlobalStatisticOutput ()
 Performs a global statistic Output. More...
 
template<typename T >
T::ProfilePoint * registerProfilePoint (const std::string &pointName)
 Registers a profiling point. More...
 
ModuleloadModule (const std::string &type, Params &params)
 Loads a module from an element Library. More...
 
template<class T , class... ARGS>
T * loadModule (const std::string &type, Params &params, ARGS... args)
 Loads a module from an element Library. More...
 
template<class T , class... ARGS>
T * loadComponentExtension (ARGS... args)
 
template<class T >
bool isSubComponentLoadableUsingAPI (const std::string &type)
 Check to see if a given element type is loadable with a particular API. More...
 
template<class T >
bool isUserSubComponentLoadableUsingAPI (const std::string &slot_name)
 Check to see if the element type loaded by the user into the. More...
 
template<class T , class... ARGS>
T * loadAnonymousSubComponent (const std::string &type, const std::string &slot_name, int slot_num, uint64_t share_flags, Params &params, ARGS... args)
 Loads an anonymous subcomponent (not defined in input file to SST run). More...
 
template<class T >
T * loadUserSubComponent (const std::string &slot_name)
 Loads a user defined subcomponent (defined in input file to SST run). More...
 
template<class T , class... ARGS>
T * loadUserSubComponent (const std::string &slot_name, uint64_t share_flags, ARGS... args)
 Loads a user defined subcomponent (defined in input file to SST run). More...
 
void fatal (uint32_t line, const char *file, const char *func, int exit_code, const char *format,...) const
 Convenience function for reporting fatal conditions. More...
 
void sst_assert (bool condition, uint32_t line, const char *file, const char *func, int exit_code, const char *format,...) const
 Convenience function for testing for and reporting fatal conditions. More...
 
bool isAnonymous ()
 
bool isUser ()
 
void setDefaultTimeBase (TimeConverter *tc)
 Manually set the default detaulTimeBase.
 
TimeConvertergetDefaultTimeBase ()
 
const TimeConvertergetDefaultTimeBase () const
 
bool doesSubComponentExist (const std::string &type)
 
SimulationgetSimulation () const
 
virtual bool doesComponentInfoStatisticExist (const std::string &statisticName) const
 
uint8_t getComponentInfoStatisticEnableLevel (const std::string &statisticName) const
 
std::vector< Profile::ComponentProfileTool * > getComponentProfileTools (const std::string &point)
 

Detailed Description

SubComponent is a class loadable through the factory which allows dynamic functionality to be added to a Component.

The SubComponent API is nearly identical to the Component API and all the calls are proxied to the parent Component.

Member Function Documentation

◆ finish()

virtual void SST::SubComponent::finish ( void  )
inlineoverridevirtual

Called after simulation completes, but before objects are destroyed.

A good place to print out statistics.

Reimplemented from SST::BaseComponent.

Reimplemented in SST::Interfaces::SimpleNetwork.

◆ init()

virtual void SST::SubComponent::init ( unsigned int   UNUSEDphase)
inlineoverridevirtual

Used during the init phase.

The method will be called each phase of initialization. Initialization ends when no components have sent any data.

Reimplemented from SST::BaseComponent.

Reimplemented in SST::Interfaces::SimpleNetwork.

◆ setup()

virtual void SST::SubComponent::setup ( void  )
inlineoverridevirtual

Called after all components have been constructed and initialization has completed, but before simulation time has begun.

Reimplemented from SST::BaseComponent.

Reimplemented in SST::Interfaces::SimpleNetwork.


The documentation for this class was generated from the following file: